EQUIPMENT for Testing of Refractories :
 
HOT MODULUS OF RUPTURE TESTER (3-Point) up to 1500C :
Designed on the guide lines of IS:1528(Part 20)-1993 & ISO:5013-1985 for a batch
of 5 or 6 Samples of size between 25 x 25 x 150 and 40 x 40 x 150 (mm).
Loading Range : up to 400 Kgs.  Load measured with in-line Load Cell.
'Peak-hold' for load at rupture.Sample-wise Digital selection of Loading Rate. PID Temperature Programmer/Controller. Thyrisorised Power Drive.  Desired atmosphere maintainable.  Data with Result Print-out, optional.  The vital parameters of the Standards are strictly maintained and variables are controlled within a narrower range to obtain more genuine Hot M.O.R. values.  The Tester is designed for convenient single-handed operation and for easy maintenance.

No. of Units Supplied : 20

H. M. O. R. Tester (4-Point), up to 1450C for a batch of 5 Specimens,
5 x 5 x 50 (mm), of high strength materials ; Loading Range : 0-100 Kgs., with Deflection Measuring device.


SPALLING RESISTANCE TEST EQUIPMENT up to 1300C :

HMOR
Special design conforms to IS:1528(Part 3)-1983 (Water Quench method) to test a batch of 3 nos. 230mm x 115mm Bricks, thickness varying between 65mm and 80mm and gives result faster.
 
SPALLING RESISTANCE TEST FURNACE up to 1600C :
Raising-Hearth type construction for Thermal Spalling Test of Refractory Shapes with reduced operational hazards in carrying out the Test
 
THERMAL EXPANSION (LINEAR & REVERSIBLE) APPARATUS up to 1150C :
For Sample of 10mm dia x 50mm long, placed vertically ; Fused Silica Tube & Rod ; Programmer/Controller and Dial Gauge ; Conforming to IS:1528 (Part 19)-1991/IS:4812-1972.

TE


Back to product

 

Next